Rena XPS-ProMail System Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Imprimeurs Rena XPS-ProMail System. Rena XPS-ProMail System User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 69
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
System shown with: XPS-ProFeed Shuttle, XPS-ProTab 4.0, XPS-ProMail 4.0 print system mounted on
XPS-ProMail Base, XPS-ProDry 8.0 and TB-659 conveyor.
XPS-ProMail System
Includes Instructions For:
XPS-ProMail Base with XPS-ProMail 3.0/4.0 print system,
XPS-ProDry 8.0 & TB-659 Conveyor
OPERATIONS
MANUAL
Revised: 4-24-14
RENA SYSTEMS INC.
910 East Main Street; Suite 200
Norristown, PA 19401-4110
Phone: (610) 650-9170
Fax: (610) 270-3947
Web Site:
www.renausa.com
Vue de la page 0
1 2 3 4 5 6 ... 68 69

Résumé du contenu

Page 1 - OPERATIONS

System shown with: XPS-ProFeed Shuttle, XPS-ProTab 4.0, XPS-ProMail 4.0 print system mounted on XPS-ProMail Base, XPS-ProDry 8.0 and TB-659 convey

Page 2

SECTION 1 GETTING ACQUAINTED 2 XPS-ProMail System Operations 4-24-14.doc XPS-ProMail Base Control Panel A MASTER Controls

Page 3

SECTION 1 GETTING ACQUAINTED XPS-ProMail System Operations 4-24-14.doc 3 XPS-ProMail 3.0/4.0 Printer Control Panel 1. ON LINE key – This k

Page 4 - DRYER SAFETY PRECAUTIONS

SECTION 1 GETTING ACQUAINTED 4 XPS-ProMail System Operations 4-24-14.doc 5 4 2 1 3 6 XPS-ProDry 8.0 These dryer lamps produce up to 8

Page 5 - GENERAL SAFETY PRECAUTIONS

SECTION 1 GETTING ACQUAINTED XPS-ProMail System Operations 4-24-14.doc 5 TB-659 Conveyor 1 CROSS STACKING GUIDE –

Page 6 - Table of Contents

SECTION 1 GETTING ACQUAINTED 6 XPS-ProMail System Operations 4-24-14.doc Notes

Page 7

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 7 Section 2 – Setting up the System NOTICE! Please refer to the “XPS-P

Page 8

SECTION 2 SETTING UP THE SYSTEM 8 XPS-ProMail System Operations 4-24-14.doc Feeder Interface: The XPS-ProMail System provides a “dry c

Page 9

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 9 A XPS-ProMail Base and Printer Setup Side Guide and Belt Positionin

Page 10 - CONVEYOR Controls

SECTION 2 SETTING UP THE SYSTEM 10 XPS-ProMail System Operations 4-24-14.doc B C D 2. Adjust the transport belts so that they are eve

Page 11

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 11 G H E F 5. Loosen the two thumb screws [E], located at the outsid

Page 13 - TB-659 Conveyor

SECTION 2 SETTING UP THE SYSTEM 12 XPS-ProMail System Operations 4-24-14.doc Installing the Ink Cartridges The XPS-ProMail 3.0 prin

Page 14

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 13 Ink Level Monitor Reset The printer can automatically calculate th

Page 15 - Feeder Setup

SECTION 2 SETTING UP THE SYSTEM 14 XPS-ProMail System Operations 4-24-14.doc Printer’s Power Switch and Fuse Locations Located on the

Page 16 - Feeder Interface:

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 15 under the printheads, slowly lower the carriage until you just begi

Page 17 - WARNING:

SECTION 2 SETTING UP THE SYSTEM 16 XPS-ProMail System Operations 4-24-14.doc Head Layouts: XPS-ProMail 3.0 Printer There are three hea

Page 18

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 17 5 4 2 1 3 6 XPS-ProDry 8.0 Setup Please review and understand al

Page 19 - SETTING UP THE SYSTEM

SECTION 2 SETTING UP THE SYSTEM 18 XPS-ProMail System Operations 4-24-14.doc Allow the Lamps to Cool Before Powering OFF The dryer lamp

Page 20

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 19 G WARNING: Improperly positioned media can damage the dryer belts.

Page 21 - Ink Level Monitor Reset

SECTION 2 SETTING UP THE SYSTEM 20 XPS-ProMail System Operations 4-24-14.doc TB-659 Conveyor Setup The conveyor provides additional dr

Page 22 - CAUTION

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 21 B C A Conveyor Position: The conveyor should be positioned at the

Page 23

RENA Systems Inc. would like to Thank You for investing in our quality built products. Please record the following information for future refer

Page 24 - Head Layouts:

SECTION 2 SETTING UP THE SYSTEM 22 XPS-ProMail System Operations 4-24-14.doc D Belt Position Adjustment: The four media transport belts

Page 25 - XPS-ProDry 8.0 Setup

SECTION 2 SETTING UP THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 23 Notes

Page 26 - Dryer Lamp Control Process:

SECTION 3 OPERATING THE SYSTEM 24 XPS-ProMail System Operations 4-24-14.doc Section 3 – Operating the System Installing the Printer Dr

Page 27

SECTION 3 OPERATING THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 25 4. While watching the printer status in the “Printers” folder; power

Page 28 - TB-659 Conveyor Setup

SECTION 3 OPERATING THE SYSTEM 26 XPS-ProMail System Operations 4-24-14.doc Connecting the Printer to the Computer NOTICE: To simply

Page 29 - Paper Stop Adjustment:

SECTION 3 OPERATING THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 27 Software Setup Example The printer can be used with many different s

Page 30 - TEST Print

SECTION 3 OPERATING THE SYSTEM 28 XPS-ProMail System Operations 4-24-14.doc 3. Click on the "Go to Preview Mode" icon , loc

Page 31

SECTION 3 OPERATING THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 29 Using Inkjet Suitable Media The XPS-ProMail System will print on man

Page 32

SECTION 3 OPERATING THE SYSTEM 30 XPS-ProMail System Operations 4-24-14.doc Printer Control Panel & MENU Features The printer'

Page 33

SECTION 3 OPERATING THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 31 Automatic Feed –Turning the feature ON will cause the printer to auto

Page 34

ii DRYER SAFETY PRECAUTIONS THE FOLLOWING MUST BE READ AND UNDERSTOOD BEFORE OPERATING THE DRYER! DUE TO THE NATURE OF THE DRYER, IT PRESENTS UNI

Page 35 - Software Setup Example

SECTION 3 OPERATING THE SYSTEM 32 XPS-ProMail System Operations 4-24-14.doc Operation Sequence Example This example assumes that the en

Page 36

SECTION 3 OPERATING THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 33 Clearing (purging) the Ink Cartridge Nozzles If the XPS-ProMail 3.0/

Page 37 - Using Inkjet Suitable Media

SECTION 3 OPERATING THE SYSTEM 34 XPS-ProMail System Operations 4-24-14.doc Print Recovery after a Jam If the media should jam in the

Page 38

SECTION 3 OPERATING THE SYSTEM XPS-ProMail System Operations 4-24-14.doc 35 Notes

Page 39 - OPERATING THE SYSTEM

SECTION 4 MAINTENANCE 36 XPS-ProMail System Operations 4-24-14.doc Section 4 – Maintenance This section discusses how to care for the

Page 40 - Operation Sequence Example

SECTION 4 MAINTENANCE XPS-ProMail System Operations 4-24-14.doc 37 Cleaning the Inkjet Cartridge (Printhead) To maintain good print quality it is

Page 41 - Printing a Test Print

SECTION 4 MAINTENANCE 38 XPS-ProMail System Operations 4-24-14.doc 4. Press the MENU key to exit the Menu features. Check that the pur

Page 42 - Print Recovery after a Jam

SECTION 4 MAINTENANCE XPS-ProMail System Operations 4-24-14.doc 39 Jams in the Printer If a jam occurs; immediately STOP the system by pressing a

Page 43

SECTION 4 MAINTENANCE 40 XPS-ProMail System Operations 4-24-14.doc Cleaning WARNING THE XPS-ProMail 3.0/4.0 PRINTER IS A PRECISION MA

Page 44 - Section 4 – Maintenance

SECTION 4 MAINTENANCE XPS-ProMail System Operations 4-24-14.doc 41 C Cleaning the Sensors Media Sensor: Directly below the media sensor [A], a

Page 45 - Purging the Nozzles

iii GENERAL SAFETY PRECAUTIONS CERTAIN SAFETY RULES MUST BE OBSERVED WHEN OPERATING THE XPS-PROMAIL SYSTEM. BEFORE USING THE SYSTEM, YOU SHOULD

Page 46 - Inkjet Cartridge Disposal

SECTION 4 MAINTENANCE 42 XPS-ProMail System Operations 4-24-14.doc Cleaning the Dryer & Dryer Lamps CAUTIONS! If following cauti

Page 47 - Jams in the Printer

SECTION 4 MAINTENANCE XPS-ProMail System Operations 4-24-14.doc 43 Notes

Page 48 - Cleaning

SECTION 5 TROUBLE SHOOTING 44 XPS-ProMail System Operations 4-24-14.doc Section 5 – Troubleshooting Guide The following troubleshooting

Page 49 - Cleaning the Sensors

SECTION 5 TROUBLESHOOTING XPS-ProMail System Operations 4-24-14.doc 45 MESSAGE DESCRIPTION SOLUTION PAUSE: Waiting for Data Printer is waiting fo

Page 50 - Lamps:

SECTION 5 TROUBLE SHOOTING 46 XPS-ProMail System Operations 4-24-14.doc Print Image Issues CONDITION PROBLEM SOLUTION Black streaks i

Page 51 - MAINTENANCE

SECTION 5 TROUBLESHOOTING XPS-ProMail System Operations 4-24-14.doc 47 Print Content Incorrect CONDITION PROBLEM SOLUTION Information being pri

Page 52 - Printer Display Messages

SECTION 5 TROUBLE SHOOTING 48 XPS-ProMail System Operations 4-24-14.doc Printer and Printer Base Issues CONDITION PROBLEM SOLUTION Can’

Page 53

SECTION 5 TROUBLESHOOTING XPS-ProMail System Operations 4-24-14.doc 49 WARNING DO NOT REMOVE THE SIDE COVERS OF THE PRINTER! THERE ARE HIGH VOLTA

Page 54 - Print Image Issues

SECTION 5 TROUBLE SHOOTING 50 XPS-ProMail System Operations 4-24-14.doc Feeding Issues CONDITION PROBLEM SOLUTION Feeder won’t start

Page 55 - Print Placement Issues

SECTION 5 TROUBLESHOOTING XPS-ProMail System Operations 4-24-14.doc 51 Feeding Issues (continued) CONDITION PROBLEM SOLUTION Media Jams Paper

Page 56

TABLE OF CONTENTS iv Table of Contents SAFETY PRECAUTIONS (You must read these precautions before operating)…………………… ii, iii SECTION 1 – GETTING

Page 57 - LCD Display Issues

SECTION 5 TROUBLE SHOOTING 52 XPS-ProMail System Operations 4-24-14.doc Notes

Page 58 - Feeding Issues

Appendix XPS-ProMail System Operations 4-24-14.doc 53 Appendix A – Technical Specifications XPS-ProMail System DIMENSIONS XPS-ProMail Base: 43” W

Page 59 - Power Issues

Appendix 54 XPS-ProMail System Operations 4-24-14.doc Appendix B – Supplies, Service & Support Supplies The following supply ite

Page 60

Appendix XPS-ProMail System Operations 4-24-14.doc 55 Appendix C – Optional Accessories Please contact your Rena Systems Dealer to purchase acces

Page 61 - XPS-ProMail 3.0/4.0 Printer

Appendix 56 XPS-ProMail System Operations 4-24-14.doc Conveyor Options Drop/Catch Tray (Part #: DROP TRAY-TB) Includes exit wheel ass

Page 62 - Supplies

Appendix XPS-ProMail System Operations 4-24-14.doc 57 TB-690, TB-690S1 and TB-690S2 - These TB-690 conveyor models are “stand-alone” devices. T

Page 63 - XPS-ProStand

Appendix 58 XPS-ProMail System Operations 4-24-14.doc XPS-ProDry 8.0 - Professional Grade, Dryer - Adjustable output; up to 8,000 Wa

Page 64 - Conveyor Options

Appendix XPS-ProMail System Operations 4-24-14.doc 59 Notes

Page 65 - Dryers for TB-690

INDEX 60 XPS-ProMail System Operations 4-24-14.doc INDEX B Batch Counter ... 3

Page 66 - XPS-ProTab 4.0

Copyright © Neopost USA 2014

Page 67 - Appendix

TABLE OF CONTENTS v USING INKJET SUITABLE MEDIA ...

Page 68

TABLE OF CONTENTS vi Notes

Page 69

SECTION 1 GETTING ACQUAINTED XPS-ProMail System Operations 4-24-14.doc 1 Section 1 – Getting Acquainted XPS-ProMail System Note:

Commentaires sur ces manuels

Pas de commentaire